Industry Information

Update January 16, 2023

Preconditions and conditions for PVC internal and external lubrication

PVC lubricants are divided into internal lubricants and external lubricants. However, the internal and external lubricants are relatively different, and there is no strict classification standard....

Update January 09, 2023

Determination of carbon black content in polyethylene pipes and fittings (thermal weight loss method)

1. Heat the combustion boat until it is hot, then cool in a desiccator for at least 30 minutes and weigh to the nearest 0.0001g. (1.0 ± 0.1)g of polyethylene samples were placed in a combustion boat...

Update January 05, 2023

Determination of Titanium Dioxide in Titanium Ore Acid Hydrolysis Solution by Ammonium Ferric Sulfate Titration

Titanium dioxide is an inorganic compound with the chemical formula TiO2. It is a white solid or powdered zwitterionic oxide with a molecular weight of 79.866. It is non-toxic, has the best opacity,...

Update December 12, 2022

Yaxing Hydrochloric Acid Phase Method CPE

Chlorinated polyethylene (CPE) is a saturated polymer material with a white powder appearance, non-toxic and odorless. It has excellent weather resistance, ozone resistance, chemical resistance, and...

Update December 07, 2022

Pvc Resin is what material

Pvc material can be seen everywhere in our lives, pipes, films, plastics, wires, mineral water bottles, wall panels, flooring, consumer goods, etc. Whether it is home life or office supplies,...

Update December 06, 2022

Loss of inferior CPE in PVC processing

Chlorinated polyethylene (CPE) is a chlorinated modified product of high density polyethylene (HDPE). As a processing modifier for PVC, the chlorine content of CPE should be between 35 and 38%....

Update December 02, 2022

Application of polyethylene wax powder and dispersion in ink

Wax is used as an additive for paints and inks. Its characteristics are simple to use. After the paint is applied, due to the volatilization of the solvent, the wax in the coating precipitates,...

Update November 30, 2022

Polyolefin film UV stabilizer/Light stabilizer

Light stabilizer (also known as photostabilizer) is an additive in polymer products (such as plastics, rubber, coatings, synthetic fibers). It can shield or absorb the energy of ultraviolet rays,...

Update November 28, 2022

Analysis of the effect of polyethylene wax on PVC pipe profiles

Under normal circumstances, many manufacturers of PVC pipe profiles prefer to use paraffin as a lubricant. However, they also overlooked a problem, that is, paraffin wax has low softening point and...

Update November 24, 2022

Application of Polyethylene Wax Emulsion in Ink

Compared with high-molecular-weight polyethylene, the low-molecular-weight polyethylene has similar softening point and other indicators, but the melt viscosity decreases greatly. Has waxy...